Det finnes to typer ildfaste keramiske fibre: keramiske fibermoduler og foldede blokker. I tillegg til forskjellen i tetthet har modulene ankere og treplater, mens de brettede blokkene ikke har det. Keramisk fibermodulen er hovedsakelig laget av keramisk fiber akupunkturteppe av tilsvarende materiale, som behandles på en spesiell maskin i henhold til strukturen og størrelsen på fiberkomponenten. Under behandlingen dannes den til slutt ved pressing i henhold til ønskede spesifikasjoner.
Keramiske fibermoduler er delt inn i 9 grader i henhold til driftstemperaturen, fra 900 grader C til 1600 grader C, vanlig, standard, høy-renhet, høy-aluminium, zirkonium-aluminium , krom-holdig, zirkonium-holdig osv., som kan dekke behovene til ulike ovner og termisk utstyr. Ulike kvaliteter av forskjellige deler har forskjellige former for varmeisolasjonskrav. Med utviklingen av den nasjonale-planen for energisparing og utslippsreduksjon, er renoveringen av den mursteinsbrennende-tunnelovnen nært forestående, og den keramiske fibermodulen har fått mye ros for sin utmerkede varmeisolasjonsytelse i taket på den{10}}brennende tunnelovnen. Med nøkkelreformene innen miljøvern har keramiske fibre spilt en viss rolle i miljøvern.
The main components of ceramic fibers are Al2O3 and SIO2. Among them, the Al2O3 content in the high-alumina ceramic fiber module is relatively high (respectively, the chemical composition of ordinary type, standard type, high-purity type, high-aluminum type, and zirconium-containing type), which is 52 percent 55 percent , which belongs to injection fiber. It is also different from the spinning fiber. The diameter of the blown fiber is smaller, generally 2.03.0 μm, and the length of the fiber is shorter, generally 100200 mm. Because the fiber is thinner, the thermal conductivity is better than that of the spinning fiber. It is easily broken and torn during the folding process. On the other hand, the high-alumina type has a relatively high content of Al2O3, so it should be avoided in the kiln with electric heat as the heat source, so as to avoid the loss of personnel and property caused by electrical conduction, and the consequences are immeasurable. In general, the standard type is more commonly used, but the type of ceramic fiber module should also be selected according to the temperature of the kiln.
www.suntherm-industry.com






